POGO?24 Position Chiller Block24位冷卻模塊 SKU: A000020

24 position tube block with integrated Spring Cushion Technology. Constructed of solid aluminum to facilitate temperature control when placed on a peltier or other temperature controlled device.

24位管塊集成彈簧緩沖技術。構造的固體鋁，以方便溫度控制時，放置在一個peltier或其他溫度控制裝置。

Capture every microliter of precious reagents while avoiding tip crashes and occlusions using Alpaqua’s SBS-compliant tube block with integrated Spring Cushion Technology.

Each of its 24 positions is independently equipped with a spring-loaded tube support capable of moving a full 3 mm down to compensate for variations in Z-positioning of pipettors.

Position diameter of 10.90 mm and a depth of 35.25 mm when the supporting spring is fully compressed.

捕獲每微升的珍貴試劑，同時避免尖端碰撞和閉塞使用Alpaqua的sbs兼容管塊集成彈簧緩沖技術。

它的24個位置中的每一個都獨立配備了一個彈簧加載的管支架，能夠向下移動整整3毫米，以補償移液器z定位的變化。

支撐彈簧完全壓縮時，位置直徑10.90 mm，深度35.25 mm。

POGO? Features

Solid aluminum for efficient cooling

24 tube capacity

Compatible with a variety of screw top vials & micro-centrifuge tubes

Spring Cushion Technology to maximize usage of reagents

Automation-friendly, SBS footprint

Integrated Spring Cushion Technology to Get That Last Drop

In many reagent kits screw cap vials are used to supply small volumes of enzymes and other precious reagents. These often need to be kept at a low temperature until used in assays. These reagents are typically supplied with very little surplus volume which presents a challenge for automation. Using conventional tube holders, pipettors need to be carefully programmed to find the bottom of the tubes – a complicated task when working with individual probes on most liquid handlers.

POGO?特性

固體鋁，高效冷卻

24管容量

與各種螺旋瓶和微離心管兼容

彈簧緩沖技術，最大限度地利用試劑

自動化友好，SBS占用空間

集成彈簧緩沖技術，獲得最后一滴

在許多試劑試劑盒中，螺旋蓋小瓶用于供應小體積的酶和其他珍貴試劑。這些通常需要在低溫下保存，直到用于分析。這些試劑通常供應很少的剩余體積，這對自動化提出了挑戰。使用傳統的管架，移液器需要仔細編程以找到管的底部-當使用大多數液體處理器上的單個探針時，這是一項復雜的任務。

POGO provides an innovative solution to the positioning problem with each of its 24 positions independently equipped with a spring-loaded tube support  to compensate for variations in Z-positioning of pipettors and ensuring your ability to get that last microliter while avoiding tip crashes and occlusions.

POGO為定位問題提供了創新的解決方案，其24個位置都獨立配備了彈簧加載管支撐，以補償移液器z定位的變化，并確保您能夠在避免尖端碰撞和堵塞的同時獲得最后一微升。