為什么使用CAPC冷板風冷加熱器/冷卻器?  

冷板使用Peltier冷卻技術是有用的，每當您的液體處理實驗室需要冷卻或加熱表面。 他們提供加熱、冷卻和溫度控制在一個設備。 這使得它們特別適合在自動化平臺上進行細胞分析和生物化學樣本的研究。 

冷板風冷加熱器/冷卻器有哪些特點?  

精確而均勻的加熱和冷卻是很重要的，精確保持溫度的能力也是很重要的。 您可能還需要考慮溫度漸變率和可達到的最高溫度。  

溫度均勻性-在整個區塊內提供相同的溫度，區塊中間或邊緣的樣本以及整個測試過程的結果都是相同的。  

溫度精度-確保精確和穩定，可重復的溫度在運行的時間內，對每一個樣品在塊。  

均勻的溫度變化(斜坡速率)-保持整個區塊的溫度均勻性。  

溫度范圍-提供的最高和最低溫度。  

占地面積小-提供所需的性能，同時占用甲板上盡可能少的空間。  

低外形-使移液和使用更高的一次性用品更容易。  

INHECO CPAC的使用  

CPAC在NGS樣品制備中經常使用，并被分子生物學家用于孵育。 

CPAC微孔板特別適用于封閉的液體處理平臺(或工作站)，如果集成了太多沒有液體冷卻的設備，甲板或樣品可能會過熱，廢熱無法有效去除。 CPAC微孔板可以集成到甲板中，廢氣在甲板下方流動。 

CPAC通常用于保護樣品不因熱變化而降解，并使試劑、探針和最終產品保持在正確的溫度下。 

Why use a Cold Plate Air Cooled Heater/Cooler?

Cold Plates using Peltier cooling technology are useful whenever your liquid handling lab needs cooling or heating surfaces. They offer heating and cooling plus temperature control all in one device. That makes them particularly suitable when you’re working with cell assays and biological and chemical samples in an automated deck.

What to look for in a Cold Plate Air Cooled Heater/Cooler?

Accurate and uniform heating and cooling are important, as are the ability to maintain temperature precisely. You may also need to consider temperature ramp rates and the maximum achievable temperature.

Temperature uniformity – delivering identical temperature across the entire block, with identical results for samples in the middle or on the edge of the block, and throughout the run.

Temperature accuracy – ensuring accurate and stable, reproduceable temperatures for the duration of the run, and for every sample in the block.

Uniform temperature change (ramp rates) – maintaining temperature uniformity across the entire block.

Temperature range – maximum and minimum temperature offered.

Small footprint – delivering the required performance while taking up as little space on deck as possible.

Low profile – to make pipetting and use of taller disposables easier.

Use of the INHECO CPAC

The CPAC is in regular use in NGS Sample Prep and is used for incubation by molecular biologists.

The CPAC Microplate is especially useful for enclosed liquid handling platforms (or workstations), when the deck or samples can overheat if too many devices without liquid cooling are integrated and waste heat is not efficiently removed. The CPAC microplate can be integrated into the deck with waste air routed below the deck.

The CPAC is often used to protect samples from degradation due to changes in heat, and to keep reagents, probes and end products at the correct temperature.